KPL/FK

Rosetta Target Body DSK Surface ID Codes
========================================================================

   This frame kernel contains a set of Rosetta Target Body DSK Surface ID
   Codes for Phobos, Deimos and Comet 9P/Tempel 1. The DSK Surface ID Codes
   for Comet 67P/Churyumov-Gerasimenko and Asteroids Lutetia and Steins are
   provided in the Rosetta Frames Kernel.


Version and Date
========================================================================

   Version 0.3 -- July 31, 2020 -- Marc Costa Sitja, ESAC/ESA
                                   Alfredo Escalante Lopez, ESAC/ESA

      Added surface names for Rosetta spacecraft and Rosetta lander
      structures.

   Version 0.2 -- May 21, 2019 -- Bjoern Grieger, ESAC/ESA

      Corrected plate number token in file names for DEIMOS_K005_THO_V01,
      PHOBOS_K275_DLR_V02, PHOBOS_M003_GAS_V01.

   Version 0.1 -- March 28, 2019 -- Bjoern Grieger, ESAC/ESA

      Added PHOBOS_K137_DLR_V02.

   Version 0.0 -- August 29, 2018 -- Marc Costa Sitja, ESAC/ESA

      First version.


References
========================================================================

   1. ``Frames Required Reading''

   2. ``Kernel Pool Required Reading''

   3. ``DS-Kernel Required Reading''

   4. Rosetta Frames Kernel.


Contact Information
------------------------------------------------------------------------

   If you have any questions regarding this file contact SPICE support at
   ESAC:

           Marc Costa Sitja
           (+34) 91-8131-457
           marc.costa@esa.int, esa_spice@sciops.esa.int

           Alfredo Escalante Lopez
           (+34) 91-8131-429
           alfredo.escalante@esa.int

   or NAIF at JPL:

           Boris Semenov
           (818) 354-8136
           Boris.Semenov@jpl.nasa.gov


Implementation Notes
========================================================================

   This file is used by the SPICE system as follows: programs that make
   use of this frame kernel must `load' the kernel, normally during
   program initialization. The SPICELIB routine FURNSH and CSPICE
   function furnsh_c load a kernel file into the kernel pool as shown
   below.

      CALL FURNSH ( 'frame_kernel_name' )
      furnsh_c    ( "frame_kernel_name" );

   This file was created and may be updated with a text editor or word
   processor.


Definition Section
========================================================================

   This section contains name to ID mappings for the Rosetta target
   body, spacecraft and lander DSK surfaces. These mappings are supported
   by all SPICE toolkits with integrated DSK capabilities (version N0066
   or later).

   Mars Satellite Phobos Surface name/IDs:

          DSK Surface Name          ID    Body ID
      ===========================  =====  =======

      PHOBOS_M003_GAS_V01          14011      401
      PHOBOS_K137_DLR_V01          10041      401
      PHOBOS_K275_DLR_V02          10042      401


   Name-ID Mapping keywords:

   \begindata

      NAIF_SURFACE_NAME += 'PHOBOS_M003_GAS_V01'
      NAIF_SURFACE_CODE += 14011
      NAIF_SURFACE_BODY += 401

      NAIF_SURFACE_NAME += 'PHOBOS_K137_DLR_V01'
      NAIF_SURFACE_CODE += 10041
      NAIF_SURFACE_BODY += 401

      NAIF_SURFACE_NAME += 'PHOBOS_K275_DLR_V02'
      NAIF_SURFACE_CODE += 10042
      NAIF_SURFACE_BODY += 401

   \begintext


   Mars Satellite Deimos Surface name/IDs:

          DSK Surface Name          ID    Body ID
      ===========================  =====  =======

      DEIMOS_K005_THO_V01          14020      402


   Name-ID Mapping keywords:

   \begindata

      NAIF_SURFACE_NAME += 'DEIMOS_K005_THO_V01'
      NAIF_SURFACE_CODE += 14020
      NAIF_SURFACE_BODY += 402

   \begintext


   Comet 9P/Tempel 1 name/IDs:

          DSK Surface Name          ID    Body ID
      ===========================  =====  =======

      TEMPEL_9P_K032_THO_V01       10930  1000093


   Name-ID Mapping keywords:

   \begindata

      NAIF_SURFACE_NAME += 'TEMPEL_9P_K032_THO_V01'
      NAIF_SURFACE_CODE += 10930
      NAIF_SURFACE_BODY += 1000093

   \begintext


   Rosetta Spacecraft Bus Surface name/IDs:

          DSK Surface Name           ID     Body ID
      ===========================  =======  =======

      ROS_SC_BUS                   -226000  -226000


   Name-ID Mapping keywords:

   \begindata

      NAIF_SURFACE_NAME += 'ROS_SC_BUS'
      NAIF_SURFACE_CODE += -226000
      NAIF_SURFACE_BODY += -226000

   \begintext


   Rosetta Spacecraft Solar Arrays Surface name/IDs:

          DSK Surface Name           ID     Body ID
      ===========================  =======  =======

      ROS_SC_SA+Y                  -226015  -226010
      ROS_SC_SA-Y                  -226025  -226020


   Name-ID Mapping keywords:

   \begindata

      NAIF_SURFACE_NAME += 'ROS_SC_SA+Y'
      NAIF_SURFACE_CODE += -226015
      NAIF_SURFACE_BODY += -226010

      NAIF_SURFACE_NAME += 'ROS_SC_SA-Y'
      NAIF_SURFACE_CODE += -226025
      NAIF_SURFACE_BODY += -226020

   \begintext


   Rosetta Spacecraft High Gain Antenna Surface name/IDs:

          DSK Surface Name           ID     Body ID
      ===========================  =======  =======

      ROS_SC_HGA                   -226075  -226070


   Name-ID Mapping keywords:

   \begindata

      NAIF_SURFACE_NAME += 'ROS_SC_HGA'
      NAIF_SURFACE_CODE += -226075
      NAIF_SURFACE_BODY += -226070

   \begintext


   Rosetta Lander Bus Surface name/IDs:

          DSK Surface Name           ID     Body ID
      ===========================  =======  =======

      ROS_LANDER_BUS               -226800  -226800


   Name-ID Mapping keywords:

   \begindata

      NAIF_SURFACE_NAME += 'ROS_LANDER_BUS'
      NAIF_SURFACE_CODE += -226800
      NAIF_SURFACE_BODY += -226800

   \begintext


End of FK file.